一体式预制桩帽构件在装配式高桩码头中的应用
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of integrated precast pile cap in prefabricated high-pile wharf
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了一种一体式预制桩帽的特点及设计方法, 通过理论分析、数值模拟对桩帽结构、连接方式等进行研究。结果表明, 为便于一体式预制桩帽的安装, 码头一般采用全直桩, 可通过桩内混凝土灌心提高整体侧向刚度。桩帽的结构设计可参照现行码头结构设计规范进行。桩帽与钢桩采用承插灌浆连接, 灌浆料可采用超高性能混凝土, 灌浆长度可按握裹力计算, 计算方法可参考国外相关规范。对于轴力较大的情况, 可在灌浆区域设置剪力键以增加黏结力。

    Abstract:

    This paper introduces the characteristics and design method of an integrated precast pile cap and analyzes its structure and connection mode through theoretical analysis and numerical simulation.According to the conclusions, all-vertical-piled wharfs can generally facilitate the installation of the pile cap, and concrete grouting inside the pile can improve the overall lateral stiffness.The structure design of the pile cap can refer to the current structure design code of wharfs.In addition, socketed grouting can connect the pile cap and steel pile, with ultra-high performance concrete as the grouting material, and relevant overseas codes can guide the calculation of the grouting length according to the grip force.In the case of large axial forces, the setting of shear keys in the grouting area can increase the bonding force.

    参考文献
    相似文献
    引证文献
引用本文

林学良,王 磊,曹凯平,等.一体式预制桩帽构件在装配式高桩码头中的应用[J].水运工程,2023(5):17-21.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-05-10
  • 出版日期:
文章二维码