马村港区危险货物滚装码头设计要点分析
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design key points for dangerous goods ro-ro terminal in Macun Port Area
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对国内危险货物滚装码头相关行业技术标准体系不完善、工程建设无明确设计依据的现状,结合危险货物滚装运输特性,开展专项设计研究。依托实际工程应用场景,综合运用规范对标、数值模拟分析及工程类比3种核心技术手段,聚焦1万GT滚装船舶丁靠泊稳适配性、相邻泊位船舶间距、水陆域总体布局及交通组织4大设计难点,开展系统性分析。明确了1万GT滚装船丁靠作业的临界稳泊参数,界定了不同危险货物滚装船舶与相邻泊位船舶的最小防火间距,优化出适配危险货物滚装运输的水陆域一体化布局方案与交通组织管控模式。研究成果为JTS 165—2013《海港总体设计规范》关于危险货物滚装码头的修订提供了技术支撑,也可为同类码头设计提供借鉴和参考。

    Abstract:

    Due to the imperfect technical standard system for domestic dangerous goods of Ro-Ro terminals and the lack of definite design criteria in engineering construction,specialized design research is carried out according to the operational characteristics of dangerous goods ro-ro transportation.On the basis of practical engineering cases,code comparison,numerical simulation and engineering analogy methods are adopted to systematically address four key design difficulties of 10,000 GT ro-ro terminals,including T-type berthing stability,adjacent berth vessel spacing,overall water-land layout and traffic organization.The critical berthing stability parameters for T-type operation of 10,000 GT ro-ro vessels are clarified.The minimum fire prevention spacing between a dangerous goods ro-ro vessel and an adjacent berth vessel is determined.An integrated water-land layout and traffic organization for dangerous goods ro-ro transportation is optimized.The results provide technical support for the revision of relevant provisions on dangerous goods ro-ro terminals in JTS 165-2013 Design Code of General Layout for Sea Ports,and can serve as a reliable reference for the design of similar terminals.

    参考文献
    相似文献
    引证文献
引用本文

白云香.马村港区危险货物滚装码头设计要点分析[J].水运工程,2026(10):151-157.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-10-16
  • 出版日期:
文章二维码